Customer Favourite
Radiant Moissanite Hidden Halo Split Shank Ring: A Buyerβs Guide
A radiant on a band that divides into twin rows of pavΓ©, with a hidden halo underneath. Why the design works, and the numbers worth asking for.
Written by the Mapple Gems workshop, Surat Β· Updated 13 October 2026
Short answer: This ring sets an elongated radiant moissanite above a hidden halo, on a shank that splits into two pavΓ©-set rows framing the centre. It can be made two-tone, with a white head on a warm band. It is made to order in 925 silver or solid 10K, 14K or 18K gold, from 2 to 5 carats. Ask for the thickness of each strand of the split shank.
A split shank widens the ring as it rises to the head, adding presence without adding a bigger stone. Here each strand carries its own row of pavΓ©, so from above you see the radiant framed by two lines of light, and from the side a hidden halo glints under the stone. Our latest order was a 3 carat radiant in 14K white gold.
Why two-tone works optically
Two-tone β a white gold head on a yellow or rose band β is not only decorative. The metal right around a stone colours what you see in it. A white head keeps the radiant looking icy, while the warm band gives the ring colour on the hand. It is the best of both, and it is a separately made head, not plating, so it does not wear through at the prong tips.
| Metal option | How the radiant reads | Upkeep |
|---|---|---|
| All white gold | Icy, maximum fire | Rhodium every 1β2 years |
| White head, warm band | Icy stone, warm ring | Rhodium on the head only |
| All yellow or rose | Warm, calmer fire | No plating needed |
Split shank thickness
A split shankβs width is often quoted as the total across both strands. But each strand carries its share of the load on its own, and here each also holds a row of pavΓ©, which removes metal to seat the stones. Ask for the thickness of each strand where it joins the head, and for at least 1.8 mm at the base of the band.
From the workshop
Our latest customer chose a 3 carat radiant in 14K white gold, the brightest version of this design. One thing owners of split shank pavΓ© rings rarely hear: the split creates a gap under the head where soap and lotion collect, out of sight. That film sits behind the pavΓ© and under the hidden halo, and it is why these rings slowly look duller. Every couple of weeks, soak the ring in warm water with a drop of washing-up liquid for five minutes and brush through the gap from below with a soft toothbrush. The sparkle comes straight back.
Before you order: a short checklist
- Ask for the radiantβs millimetres at your chosen carat and do a paper test.
- Ask for each strandβs thickness, not only the total width.
- Decide on all-white, two-tone or warm metal.
- Check the head height on the CAD side view.
- Get your size right first; pavΓ© on both strands limits resizing.
Keep reading
Frequently asked questions
What is a split shank ring?
A ring whose band divides into two strands as it rises to the head, adding width and a modern line.
Why choose a two-tone radiant ring?
A white head keeps the stone looking icy while a yellow or rose band adds warmth on the hand.
Is a pavΓ© split shank strong enough for daily wear?
Yes, when each strand is thick enough. Ask for each strandβs thickness and at least 1.8 mm at the base.
Can you see the hidden halo from above?
No. It sits under the radiant and shows from the side.
How do I keep a split shank pavΓ© ring bright?
Soak it in warm soapy water and brush through the gap under the head with a soft toothbrush every couple of weeks.
The radiant hidden halo split shank ring, made to order in Surat
2 to 5 carats, 925 silver to solid 18K gold, CAD preview before production.
See the ring All engagement rings
Leave a comment