Customer Favourite
Pear Lab Grown Diamond Leaf Wreath Bridal Set: A Buyerβs Guide
A pear diamond the wreath seems to have grown around, and a band that closes the circle. What makes this set different, and what it asks of you as an owner.
Written by the Mapple Gems workshop, Surat Β· Updated 13 October 2026
Short answer: This bridal set places a pear cut lab grown diamond inside a wreath of slender branches carrying marquise-shaped diamond leaves, over a hidden pavΓ© halo. The matching band repeats the branch so that, worn together, the leaves close into a full circle around the stone. It comes with an IGI report, in 2 to 5 carats, in 925 silver or solid 10K, 14K or 18K gold.
Most nature-inspired rings run a vine along the band and leave the head conventional. This one does the opposite: the branches climb around and above the girdle, so the pear looks held by the wreath rather than dropped into a setting. Underneath, a hidden halo lights the arrangement from below. Our latest order was a 3 carat pear in 14K yellow gold β the metal that makes the leaves look most like foliage.
A set designed as one piece
The band is not an accessory here; it completes the design. Worn alone, the engagement ring shows a wreath that is deliberately open on one side. Add the band and its branch fills the gap. That has three practical consequences:
- A band bought elsewhere will not nest into the wreath. The matching band is the one that fits.
- Resize both rings together, so the branches still meet.
- Order both in the same metal and karat; 14K beside 18K shows a visible colour difference where the leaves touch.
Protecting the pearβs point
A pear is round at one end and pointed at the other. The point is the thinnest part of the stone and the most exposed to knocks. Lab grown diamond is Mohs 10 but, like every diamond, it has cleavage planes, so a sharp blow on an unprotected point can chip it. The point should sit inside a V-shaped prong that wraps it. Check this on the CAD preview from above.
Traditionally a pear is worn point towards the fingertip, which makes the finger look longer. Some people prefer it reversed. Either is fine; decide before the setting is made.
What the IGI report does and does not show
| On the report | Not on the report |
|---|---|
| Colour and clarity grades | A cut grade (only rounds get one) |
| Measurements (length, width, depth) | The bow-tie: a dark band some pears show across the middle |
| A plot of inclusions | How the colour will read once set in your metal |
| The girdle inscription number | Anything about the ring itself |
A rotating video of the stone in ordinary light fills the gaps. Ask for one before the stone is set, and check that the outline is symmetrical: both shoulders of the pear should curve evenly.
From the workshop
The leaves are what make this ring, and they are also what to look after. Each one is a small marquise-shaped diamond on a raised branch close to the centre stone, so the head has more edges than a plain setting. Two habits keep it right. First, check the leaves for snagging on knitwear or tights: a leaf that has started to catch has usually lifted slightly and needs a quick bench check. Second, clean under the branches. Hand cream and soap collect beneath them and on the back of the centre stone, and a diamond that looks dull is nearly always filmed underneath, not damaged. Soak for five minutes in warm soapy water and brush gently from below with a soft toothbrush.
Before you order: a short checklist
- Decide the direction of the pearβs point.
- Confirm a V-prong wraps the point on the CAD preview.
- Ask for a rotating video to check symmetry and any bow-tie.
- Order both rings in the same metal and karat, and resize them together.
- On arrival, match the girdle inscription to the IGI report.
Frequently asked questions
Can I wear the leaf wreath engagement ring without the band?
Yes. Alone, the wreath is open on one side by design; the matching bandβs branch closes it into a full circle.
Will another wedding band fit with this ring?
Not neatly. The matching band is shaped to nest into the wreath; a band from elsewhere will leave a gap or rub against the leaves.
Which way should the point of a pear face?
Traditionally towards the fingertip, which lengthens the finger. Reversed is a matter of taste. Decide before the setting is made.
Can a lab grown diamond chip?
Rarely, but yes: all diamonds have cleavage planes and points are most exposed. A V-prong over the pearβs point protects it.
Are the leaves real diamonds?
The listing describes the leaves as diamond-set marquise shapes. If you want written confirmation of the material of every accent stone, ask before ordering β it is a fair question for any ring.
The pear leaf wreath bridal set, made to order in Surat
Lab grown diamond with IGI report, 2 to 5 carats, silver to 18K gold.
See the bridal set All lab grown diamond rings
Leave a comment